A must-read guide for using solenoid valves to improve the stability and efficiency of industrial automation systems

Solenoid valves are commonly used actuators in industrial automation control systems and are widely used in fluid control in various fields. Proper use and maintenance of solenoid valves can improve system stability and reliability. Here are some key considerations:

Choose a suitable solenoid valve: Choose a suitable solenoid valve according to the working environment and requirements, including valve body material, sealing material, valve type, etc. Ensure that the solenoid valve can work properly and resist the erosion of harsh environments.

Install the correct position: Install the solenoid valve in the correct position according to the needs of fluid transmission. Avoid installation that is too far or too close, resulting in unstable fluid pressure or failure of the valve to open properly.

Provide stable power supply: Solenoid valves require a stable power supply to ensure that the voltage meets the specified range and avoid excessively high or low voltages from affecting the normal operation of the solenoid valve.

Prevent overload and burnout: When using a solenoid valve, make sure that the load it bears is within the specified range. Excessive load will cause the solenoid valve to burn out.

Regular maintenance and cleaning: Regularly check the sealing performance of the solenoid valve and clean internal impurities to ensure the normal operation of the solenoid valve.

Prevent icing and condensation: When using the solenoid valve in a low-temperature environment, measures should be taken to prevent icing and condensation, so as not to affect the normal operation of the solenoid valve.

Avoid electromagnetic interference: Solenoid valves are susceptible to external electromagnetic interference. To avoid this, shielding measures can be taken, such as using shielded cables or adding filters.

Regularly check the electromagnet: The electromagnet is the core component of the solenoid valve. Its working status should be checked regularly to maintain good working performance.

Use in strict accordance with the operating procedures: Follow the operating procedures and open and close the solenoid valve correctly to avoid malfunction caused by misoperation.

Learn and understand the working principle and maintenance methods of solenoid valves: It is very important for operators to understand the working principles and maintenance methods of solenoid valves, so that they can handle faults in time and perform simple maintenance.

To sum up, the correct use and maintenance of solenoid valves is the key to ensuring the stable operation of industrial automation systems. Following the above precautions can extend the service life of the solenoid valve and improve the reliability and efficiency of the system.